What have you done on your bike today?

Rode the SF in to work today - what a dream that bike is when it's in it's happy place effortlessly blazing down the road. I need to schedule the Annual service and take care if that recall.

Slow leak on the rear on KTM, found a finishing nail in a tread, shoulda been an easy fix. Tried plugging it, no joy. Not sure how I fucked that up. Not crazy about replacing a brand new Rosso IV.
 
Rode the SF in to work today - what a dream that bike is when it's in it's happy place effortlessly blazing down the road. I need to schedule the Annual service and take care if that recall.

Slow leak on the rear on KTM, found a finishing nail in a tread, shoulda been an easy fix. Tried plugging it, no joy. Not sure how I fucked that up. Not crazy about replacing a brand new Rosso IV.
I find the softer the tyre the harder to plug..
 
I deflated the tire and let it sit a few days, let the heat do its thing. I just inflated it to 36psi a few minutes ago, checked for leaks, no bubbles. I'll wait til tomorrow take it for a spin, obsessively checking pressure pre, during, post, and see if it holds. 🤞
If its not holding air, smoke it till it blows bro!!! And film it!!!!!
 
Make sure you put no fuel in it @Daughterofdesmo seems to have started a new millennial trend of fuel lights being brightly illuminated and living their best lives 😍😂

Don’t worry buddy, I’m all over it

IMG_7694.webp
 
Changed a couple of threaded inserts on the Daytona today. When I took the tail unit off the other day the two rear screws were quite tight coming out & one was spinning the insert, which required gripping from the rear to get the screw out.
A bit of careful grinding with the Dremel weakened the lip of the inserts enough so I could peel them off & extract the insert bodies from below.

25D82D4D-267C-4C19-A701-ECF64745D3CF.webp


254CF1D5-877B-400F-9526-FAA632F1390A.webp


After a quick clean up the new inserts were installed.
7DCAC547-538F-44C9-B560-870631FB20FA_1_201_a.webp


New inserts fitted.
69EF1521-8BB4-4D6A-ACF8-7BFC6E64193C.webp


All back to normal now (y)
E1D0D237-79E4-48EC-9730-A386966FF8E2.webp
 
Cracking weather today for our Exmoor run.
We all met up in Taunton, then went to Minehead
IMG_2235.webp




Then down Contisbury hill

IMG_2239.webp


Blackmoor gate for lunch


Then on to Great torrington ( a popular stopping of f

place Note the Harley parked up beside the Enfield).
IMG_2240.webp


Then on to The Black Cat Garage before making our way home for a well earned beer.

IMG_2241.webp
 
@SHarper came down and we met at Loomies with @Hugo Magnus, it was one of the hottest days on record!!
When Hugo did that thing we said we’d never talk about. 🤫

I’m up for a bimble darn saaarf, got to visit someone in Paignton, so could combine the two, maybe even come via Wales and visit my cousin in Brecon; I can feel a road trip coming on.

I’m not meeting up with you if you still have ape hangers. I can forgive the Harley, but a line has to be drawn somewhere.
 
When Hugo did that thing we said we’d never talk about. 🤫

I’m up for a bimble darn saaarf, got to visit someone in Paignton, so could combine the two, maybe even come via Wales and visit my cousin in Brecon; I can feel a road trip coming on.

I’m not meeting up with you if you still have ape hangers. I can forgive the Harley, but a line has to be drawn somewhere.
I have drag bars to fit on it just haven't got round to fitting them yet and also some 2 inch riseres!! Flat bars for me dude, i did the same to my VN800!!


1776539471677.webp
 
Back
Top Bottom