Almost completed the rebuild of my 996 S4R. I’ve been trying to crank the motor over on the button to get some oil circulating. I’ve left the fuel pump and coil sticks disconnected but when I turn the key all I get is the oil warning light illuminated, no neutral light and nothing else works. I’ve checked all fuses and shorted the neutral switch to earth, still nothing. The immobiliser light flashes with the ignition off and in the on position. In the end I cranked the motor by putting a direct 12v on the starter motor which achieved what I wanted to do. Does the fuel pump need to be connected in order to get the permissive to turn the motor over on the button? Can’t understand why there’s no neutral light? If I disconnect the dash multi connector plug and plug it in again the clocks do a full sweep and the right front indicator flashes along with the rear left!!! It then reverts to just the oil warning light illuminated. It is of course possible I have the indicator wiring crossed. The whole loom has been off during the refurb
Ian
Ian