Can anyone with knowledge of a very early production Monster 900 tell me why there are 3 spigots underneath the tank?
It’s a ‘94 reg bike but its frame number is 499. Judging by the handwritten name and date on the underside of the tank (sorry no photo of that at present) I’m assuming it’s the original tank.
The 2 spigots with the braided pipe on are the breather and overflow/water drain. In the top right is the fuel level sensor and the stop cock/fuel delivery connector is out of shot on the right.
The reason I ask is the spigot which is not attached to anything appeared to be blocked off, however, it’s now started leaking fuel so clearly comes straight from the tank.
My questions are;
Should that spigot be blocked off?
Why is it there if that’s the case?
What’s the best solution to fix the leak? Just block it up with JB weld? Or something better eg live with the leak but run another pipe to the fuel filter via a T connection in the existing pipe between the tank and fuel filter so the leaking fuel just goes into the fuel filter and feeds the carbs.
It’s a ‘94 reg bike but its frame number is 499. Judging by the handwritten name and date on the underside of the tank (sorry no photo of that at present) I’m assuming it’s the original tank.
The 2 spigots with the braided pipe on are the breather and overflow/water drain. In the top right is the fuel level sensor and the stop cock/fuel delivery connector is out of shot on the right.
The reason I ask is the spigot which is not attached to anything appeared to be blocked off, however, it’s now started leaking fuel so clearly comes straight from the tank.
My questions are;
Should that spigot be blocked off?
Why is it there if that’s the case?
What’s the best solution to fix the leak? Just block it up with JB weld? Or something better eg live with the leak but run another pipe to the fuel filter via a T connection in the existing pipe between the tank and fuel filter so the leaking fuel just goes into the fuel filter and feeds the carbs.