Brake light problem

Duke-70

Active member
When I apply the front brake the rear light dims and only illuminates the top row of the LEDS. Once released the light goes bright again and all LEDs are illuminated.
Anyone else’s come across this?
 
It’s a 2010 model. The rear light is on bright constantly, once I activate the microswitch it dims, to the top row of LEDS
It is doing the opposite of what I understand it should do
 
Check the ground/earth at the back of the rear led lights, then also check the leads and connectors going into the led unit. If the fuse covering the rear light also works for things like the horn, check if those extras work too.

Another two areas to check are the switch in regards to the front brake lever. Also follow those leads further as they have a connector on those wires as they get closer to the headlight. That's all I got

@Derek @chrisw ?
 
If I disconnect both micro switches it returns to top LEDs being lit, I presume this is the correct operation for the rear light?
If I then short the wires of the disconnected switch the brake light operates as normal all LEDs lit brightly.
The bike has been sat for a while and rebuilt so I didn’t checked the brake lights before the tear down. Looks like I might have a dodgy microswitch, but Ducati want over £50! Any cheaper alternatives?
 
Back
Top Bottom