Clutch bearing thingy bob thing ???

[Wazzaduke33]

Okay so I’m servicing and blinging the Hyper 1100S in these dark and boring times. I’ve taken out the blue anodised clutch plate (because it’s blue) and getting it redone red. I’ve removed the bearing avd bought a new SKF one, the removed one has an inner part that the clutch rod fits into, does this punch out or where can I buy a new one ???

 

[Wazzaduke33]

Item 3 on the fiche

 

[Barry Hell]

I

Item 3 on the fiche

I would say yes, but someone else will know for sure

 

[Robarano]

Yep. That just sits on the end of your rod. I'll knock out of the centre of the bearing.

 

[WAYNE]

If you need a new one i get a lot of my stuff here, i've heard them called a top hat, kind of makes sense .

Genuine parts - Ducati

www.bike-parts-ducati.com

 

[Wazzaduke33]

Thanks you lovely lot

 

[West Cork Paul]

I drilled a hole in my workbench, put the pressure plate over it with the bearing over the hole and then wacked it. Straight through the hole, bingo, , but then straight into the bucket of drained old oil which is under the bench pending disposal .

 

[Retired member]

I drilled a hole in my workbench, put the pressure plate over it with the bearing over the hole and then wacked it. Straight through the hole, bingo, , but then straight into the bucket of drained old oil which is under the bench pending disposal .

Old oil, toothless sprockets, bent coil packs etc

 

[Barry Hell]

Old oil, toothless sprockets, bent coil packs etc

If you're looking for old oil, I'm your man

 

[West Cork Paul]

Old oil, toothless sprockets, bent coil packs etc

I keep EVERYTHING* as you will see when I produce the photos of the inside of my shed later .


* you never know when it might come in useful