Panigale 1299R Build
- Thread starter Robarano
- Start date
Weather is rubbish, having an easy day so did another few hours while listening to Sky Sports Centre (Wish I hadn't bothered with that crap. 
)
Started with this.
Started on the front suspenders.
Brake discs & Wheels (Those little circlips and washers were a mare.
I did straighten that Ohlins decal, I never noticed I had knocked it while it was still wet.
Had to soak the tyre in boling water as it was a pig, it was a doddle after that.
Then fitted the front end.
Next step is the swinging arm.
)Started with this.
Started on the front suspenders.
Brake discs & Wheels (Those little circlips and washers were a mare.
I did straighten that Ohlins decal, I never noticed I had knocked it while it was still wet.
Had to soak the tyre in boling water as it was a pig, it was a doddle after that.
Then fitted the front end.
Next step is the swinging arm.
Last edited:
You might have to buy another one when this is finished Rob, you got the hang of it now, nicer to have a collection of these instead of a helmet collectionWeather is rubbish, having an easy day so did another few hours while listening to Sky Sports Centre (Wish I hadn't bothered with that crap.
Started with this.
View attachment 35450
Started on the front suspenders.
View attachment 35452
Brake discs & Wheels (Thise little circlips and washers were a mare.
View attachment 35453
I did straighten that Ohlins decal, I never noticed I had knocked it while it was still wet.
View attachment 35455
View attachment 35457
Had to soak the tyre in boling water as it was a pig, it was a doddle after that.
View attachment 35458
View attachment 35459
Then fitted the front end.
View attachment 35460
View attachment 35461
View attachment 35462
Next step is the swinging arm.
I’ve the Anniversario version and a Huracan still sitting in the boxes, this is making think I should make a start!
You forgot me?
I don’t have you in a box do I ?
.
A bit more. It's very theraputic. But bloody fiddly at times.
Swing arm.
All of these decals had to be fitted to the rear wheel. Some are <1mm in width. A craft knife, a magnifying glass and hands like an octopus required.
Swing arm fitted.
Chain.
Paddock. Stand. Almost big enough to use on one of the full size bikes.
Next...Rear suspenders.
But bloody fiddly at times. Swing arm.
All of these decals had to be fitted to the rear wheel. Some are <1mm in width.
A craft knife, a magnifying glass and hands like an octopus required.Swing arm fitted.
Chain.
Paddock. Stand. Almost big enough to use on one of the full size bikes.
Next...Rear suspenders.
Last edited:
You can further enhance the kit if you wish:
POCHER DUCATI 1299 PANIGALE S SCALE HARDWARE SET + TOOL KIT + INSTRUCTION PHOTOS | eBay
This is a “Buy It Now” for the Pocher 1/4 Ducati 1299 Panigale S Scale Hardware Set. The photos will clearly show what goes where, and which hardware replaces which screw. This set will greatly enhance the look of the already impressive Pocher Ducati model.
www.ebay.co.uk
You can further enhance the kit if you wish:
POCHER DUCATI 1299 PANIGALE S SCALE HARDWARE SET + TOOL KIT + INSTRUCTION PHOTOS | eBay
This is a “Buy It Now” for the Pocher 1/4 Ducati 1299 Panigale S Scale Hardware Set. The photos will clearly show what goes where, and which hardware replaces which screw. This set will greatly enhance the look of the already impressive Pocher Ducati model.www.ebay.co.uk
The detail is incredible! In the pictures it could pass as a real bike.As I had the rear suspenders built up, I fitted it tonight.
View attachment 35714
View attachment 35715
Not long before Chiz can ride it.
Do they supply the micro tools needed to assemble it as well eg screwdriver(s), tiny spanner/hex key?Some of the parts were very small, but clutch side is complete.
View attachment 36132
View attachment 36133
There is one small screwdriver for the rear hub, nothing else.
What do you expect for £1,400 rrp? 
Should get a snap-on set supplied at that priceThere is one small screwdriver for the rear hub, nothing else.
Halfords surlyShould get a snap-on set supplied at that price
You can get them less than half price (as you did I think) but if they had done a 1098R it would have been worth double it's RRP by nowThere is one small screwdriver for the rear hub, nothing else.
Pocher 1/4 Ducati Superbike 1299 Panigale R Final Edition
Pocher 1/4 Ducati Superbike 1299 Panigale R Final Edition, part of the Wonderland Models range. Shop now with fast, hassle-free delivery.
www.wonderlandmodels.com
Sounds like DucatiThere is one small screwdriver for the rear hub, nothing else.
Sounds like Ducati
I hope the nuts and bolts are better quality than Ducati's
£250 squiddlies for a display case!Pocher 1/4 Ducati Superbike 1299 Panigale R Final Edition
Pocher 1/4 Ducati Superbike 1299 Panigale R Final Edition, part of the Wonderland Models range. Shop now with fast, hassle-free delivery.
some people could build a shed to put it in for less than that I'm sure.
They would surly have to skimp on the roof£250 squiddlies for a display case!
Actually more than half
You can get them less than half price (as you did I think) but if they had done a 1098R it would have been worth double it's RRP by now
Pocher 1/4 Ducati Superbike 1299 Panigale R Final Edition
Pocher 1/4 Ducati Superbike 1299 Panigale R Final Edition, part of the Wonderland Models range. Shop now with fast, hassle-free delivery.
That's where I bought it from.
Depends what type of roof you wantThey would surly have to skimp on the roof
Depends what type of roof you want